Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
Contact us with any questions
Mounting, Balancing
Free shipping on all orders over $500 *
New - now includes ultra strong TCT free floating pivot bushings that are self lubricating and eliminates friction.
ReadyLIFT is proud to offer an SST Lift Kit system for the 2007-2013 1500-series Silverado/Sierra 6-lug 4WD Trucks.The 69-3485 4.0" SST Lift Kit is the result of over six months of extensive product development followed by rigorous on and off road testing. This system significantly increases ground clearance while allowing for tire sizes up to 33" on aftermarket wheels. The most common tire size for this application is 33x11.50. 22x9.5 with 5.5" backspacing requires no fender modifications. 17x9 +0 offset on a 285/70R17 will fit with no rubbing. With a 295/70r17 minor trimming/modification required. Note: This kit is designed to be used with aftermarket wheels. The ReadyLIFT 4.0" SST Lift Kit will raise the 2007-2013 Silverado/Sierra 1500 4WD trucks 4.0" in front thanks to tough trail-proven 4.0" powder coated steel strut extensions that bolt directly to the top of the factory strut. Unlike some kits which require you to cut off your strut studs or break the top hat seal which is irreversible modifications, our rugged strut extensions require no modifications to be made to the strut in order to install the extension. This guarantees the strut will maintain the factory integrity as well as drastically reducing installation time.
Two key products were developed to make achieving 4" of lift without modifications a possibly. At the heart of the system is our 100% DOM tubular Upper Control Arm. This new heavy-duty control arm features OEM-style ball joints pre-pressed into a strong crown that retains OEM geometry throughout the suspension cycle and doesn't require any modifications to the spindle. That means no drilling or machining to make the ball joints fit the spindle. The second important product that makes this kit possible is our Patent Pending CNC-machined 6061-T6 billet Aluminum differential drop brackets. When raising the front suspension 4.0", the differential must be lowered to maintain front axle and CV angles. ReadyLIFT has engineered a differential drop system that cuts installation time in half compared to other similar kits. Unlike other differential drop brackets made from steel plate that bend and can cause CV failure, our CNC-machined brackets cannot ever bend, break or cause any driveline problems when using 4WD mode. That is guaranteed! Accompanying our patent pending differential drop brackets is a thick powder coated plate steel skid plate that utilizes the factory attachment locations for ease of installation while providing tough differential protection on rough terrain. To lift the rear of the Silverado/Sierra pickups this lift system includes 3.0" OEM-style cast iron rear lift blocks and u-bolts. Our 3.0" rear lift blocks include the correct pinion angle correction and axle locating ears for perfect fit and performance. This block replaces the factory 1.25" rear block for an increase of 1.75" which will provide approximately 0.5" of rear to front rake. A slight rake is helpful for towing or hauling.
Completing this great new lift system is a set of steel rear shock extensions. No need to replace your great-riding factory rear shocks with inferior aftermarket shocks. These new shock extension brackets keep the rear shocks in the factory mounting position which means your truck will ride great! And that's important! Like all ReadyLIFT products, the 69-3485 SST Lift Kit System is protected by our Limited Lifetime Warranty.
NOTE: The ReadyLIFT 4" SST Lift Kit is designed for use with Aftermarket Wheels with a backspacing of 5.25". If you intend to run the stock wheels with an aftermarket larger tire, a wheel spacer is required to prevent the tire from touching the control arm at full locked turn. ReadyLIFT has developed a CNC-machined billet Aluminum wheel spacer 10-3485 for use with factory wheels which have the stud pockets cast into the wheel next to the lug holes on the back side of the wheel. To run the OE/Factory wheels AND tires, you will need to use the ReadyLIFT 1/2 Billet Wheel Spacers for use with OE/Factory wheels and tires".
NOTE: Does Not Work With AWD Denali Trucks
NOTE: Does NOT work with 2013 Z71 4WD trucks with Rancho front struts. For all 2007-2011 Z71's it is imperative that installer measure vehicle prior to purchase. There must be a 2.25" to 2.5" difference between the front and the rear.
NOTE: Not designed for off-road use.
We offer FREE Ground Shipping anywhere in the Continental U.S. 48 States (excluding p.o. box addresses) for most wheel and tire orders over $500. Products may be shipped via Fedex, UPS, RLCarriers, etc. Due to the nature of ground shipping, multiple packages may arrive at different times. Usually within a few days apart at most.
As long as the product has not been installed, you can return it to us within 14 days of delivery. This includes, but is not limited to, unmounted wheels and tires, suspension, and any other parts that are not custom made to your vehicle. The product MUST be in BRAND NEW RESELLABLE CONDITION and MUST be in ORIGINAL MANUFACTURERS PACKAGING. For returns, you must first call and get an authorization from us, so that we can document the reason for its return. If you do not get this authorization, we will not know why the items are being returned, and many times we will not know who it is returning them.
For cancellations, you must first call and verify that the order is not in production if your wheels are custom drilled or shipped. If the product has been received by us for mounting and balancing, restocking fees and shipping fees will be applied. Restocking fees are determined by the wheel, tire, or suspension brand. Some manufacturers do not charge a restocking fee. Some can charge up to a 25% restocking fee. You will be responsible for the return shipping if delivered, and the initial shipping charges incurred are non refundable. Clearance items are non-refundable and do not come with a warranty as many times the product is being discontinued, and will no longer be available. Wheels that are custom built or semi-custom built are not returnable and cannot be exchanged for any reason as they are built specifically for your vehicle. If your wheels are in production and are custom made to your vehicle, they are not able to be cancelled. Any product that has been altered, modified, or customized for the customer or by the customer is sold as is, and cannot be returned or refunded for any reason.
Many of the products we offer are custom built or assembled. These items cannot be cancelled, returned, or exchanged once the process of building or assembling this product has begun. This includes custom wheels, wheel and tire packages, custom ordered parts, and others. Please be aware that these are policies established by the manufacturer and by purchasing this product on this website, you agree to the terms of these custom items.
Wheels: | Wheel and tire packages cannot be cancelled, returned, or exchanged. If the wrong product is received, we will be happy to correct the issue. Custom wheels cannot be cancelled, returned, or exchanged. If the product does not fit, we will be happy to correct the issue. |
Tires: | Tires that have been mounted cannot be returned for any reason. Please make sure to verify you are ordering, and recieved the correct tire size. |
Custom Assembled Aftermarket Parts | :Typically most aftermarket parts are not custom assembled and can be returned if unused and in brand new re-sellable condition. If a custom assembled part is ordered such as custom coilover kits, custom exhaust, and others, returns, exchanges, or cancellations are not allowed. If the wrong part is received, or there are issues with the items recieved, we will be happy to correct the issue. |
Please review our FAQ section for all common questions. If you do not see the answer you are looking for, feel free to email or call us and one of our staff will be happy to assist